Map Industries

Dear Sir/ Madam,

 

MAP Industries is an ISO 13485:2016, ISO 9001:2015, WHO-GMP and CE Certified Company.

 

We are sending herewith a proposal for a CSSD requirement Attached herewith is a detailed techno commercial quotation as per our normal supply. Please go through the same and call/mail us for any clarifications or explanations that you may need.

Dear Sir/Madam,

MAP Industries is an ISO 13485:2016, ISO 9001:2015, WHO-GMP and CE Certified Company.

We are sending you herewith an offer for Horizontal HPHV Fully Automatic Cylindrical Autoclave, with all the technical specifications and terms as per our normal supply. Please go through the same and call/mail us for any clarifications or explanations that you need.

 

Please note since it is mandatory to have pulsing and drying in the steam cycle now, even all our small cylindrical autoclaves come with a standard automation package. The hardware is a Microprocessor / PLC and it is accompanied by software, which shall be installed in any PC at the client’s place.

 

Monitoring, controlling, and viewing of on-line parameters by the supervisor / administrator who is viewing only the computer is thus possible. The operator only has to load the machine and press start from the panel on the machine. He too can view all the various parameters like time, temperature, pressure, instrument status, current phase etc. on the panel.

 

The most important feature of the automation is the reporting. Reports in two formats: (1) Detailed data (2) Single page cycle-summary reports are available for printing as and when required and are automatically stored digitally. This ensures that they record can be stored in a CD or any other digital mode for future reference.

Description:

• Inner Seal (Chamber) SS 316L Thickness: 5mm 
• Chamber Operating Pressure Negative pressure cycle
• Chamber Testing pressure 1.5 Kg/cm2 
• Single Door SS 316L Thickness: 10mm 
• Gasket Silicon Gasket (10/12 mm solid section) 
• Outer cover Factory Finished (Poly-coated) MS  
• Heating SS 316L Heaters on all sides of the Chamber for uniform heating throughout the load.
• Temp Sensor For accurate measuring and controlling of Temp. in the chamber     
• RH% Sensor For measuring and controlling the humidity of the chamber
• All fittings on the machine SS 304
• Safety Valve SS 304
• Humidification We will provide sponge for Humidification 
• Vacuum  Vacuum created by Ventury system. (Make: Festo)
• Controller For Controlling ETO Operation (PID Controller)
• Testing Pressure / Vacuum testing as per specified standards. (1.5 times the working pressure)
• Operation Door closing is manual
• Loading Trolley Fabricated with SS 304

Operating Temp Maximum: 45°C to 55°C (chamber)

• Medium Cycle: 35°C to 45°C
• Cool Cycle: 35°C to 40°C
• Hot Cycle: 48°C to 55°C