Map Industries

Dear Sir/ Madam,

MAP Industries is an ISO 13485:2016, ISO 9001:2015, WHO-GMP and CE Certified Company.

We are sending herewith a proposal for a CSSD requirement Attached herewith is a detailed techno commercial quotation as per our normal supply. Please go through the same and call/mail us for any clarifications or explanations that you may need.

• Inner Seal (Chamber) SS 316L Thickness: 5mm 
• Chamber Operating Pressure Negative pressure cycle
• Chamber Testing pressure 1.5 Kg/cm2 
• Single Door SS 316L   Thickness: 10mm 
• Gasket Silicon Gasket (10/12 mm solid section) 
• Steam Generator  SS 316L   Thickness: 3mm 
• Outer cover Factory Finished (Poly-coated) MS  
• Heating SS 316L Heaters on all sides of the Chamber for uniform heating throughout the load.
• Temp Sensor For accurate measuring and controlling of Temp. in the chamber
• RH% Sensor For measuring and controlling the humidity of the chamber
• Pressure Transmitter For measuring and controlling the pressure-vacuum that the load is subjected to during removal and charging of Gas.
• All fittings on the machine SS 304
• All Valves for Automation Teflon construction Pneumatic valves, operated by Comp. Air supply through Solenoid valves.
• Humidification Special Humidifier for the purpose of humidification of the load and heating of the gas.
• Vacuum  Vacuum created by Ventury system. (Make: Festo)
• Automation Hardware PLC Make: Honeywell
• Process Reports with thermal printer Reports are generated by the software for each and every cycle in three formats, viz. (i) Single page Summary report and (ii) Detailed Report
• Testing Pressure / Vacuum testing as per specified standards. (1.5 times the working pressure)
• Operation All functions are electro-pneumatically operated. Door closing is manual
• Loading Trolley Fabricated with SS 304
• Battery Backup UPS system will be provided for battery backup. If power failure it will usable for 20 minutes for continuous power supply. 
• Air Filter 0.2 micron air filter also provided with machine for fresh air.

• Maximum: 45°C to 55°C (chamber)
• Medium Cycle: 35°C to 45°C
• Cool Cycle: 35°C to 40°C
• Hot Cycle: 48°C to 55°C       

Dear Sir/ Madam,

MAP Industries is an ISO 13485:2016, ISO 9001:2015, WHO-GMP and CE Certified Company.

We are sending herewith a proposal for a CSSD requirement Attached herewith is a detailed techno commercial quotation as per our normal supply. Please go through the same and call/mail us for any clarifications or explanations that you may need.

• Capacity of Water Tank: 3.5L clean water tank and 5 litre waste water Tank 
• Safety Features: Safe Valve Double-control lock system and self-test alarm system 
• Power: 1800W – 2100W
• Print: Print by optional external mini-printer or download from USB port
• Test Program: Bowie & Dick test, Helix test, Vacuum test
• Instrument Container: 5-layer tray rack with 3 trays
• Functions Work: Kill the AIDS (HIV), hepatitis B (HBV), mad cow virus and Bacillus

• Inner Seal (Chamber) SS 316L   Thickness: 5mm 
• Chamber Operating Pressure Negative pressure cycle
• Chamber Testing pressure 1.5 Kg/cm2 
• Single Door SS 316L   Thickness: 10mm 
• Gasket Silicon Gasket (10/12 mm solid section) 
• Steam Generator  SS 316L   Thickness: 3mm 
• Outer cover Factory Finished (Poly-coated) MS  
• Heating SS 316L Heaters on all sides of the Chamber for uniform heating throughout the load.
• Temp Sensor For accurate measuring and controlling of Temp. in the chamber     
• RH% Sensor For measuring and controlling the humidity of the chamber
• Pressure Transmitter For measuring and controlling the pressure-vacuum that the load is subjected to during removal and charging of Gas.
• All fittings on the machine SS 304
• All Valves for Automation Teflon construction Pneumatic valves, operated by Comp. Air supply through Solenoid valves.
• Humidification Special Humidifier for the purpose of humidification of the load and heating of the gas.
• Vacuum  Vacuum created by Ventury system. (Make: Festo)
• Automation Hardware PLC          
• Make: Kinco 
• Make: Kinco (7 Inch – Multicolor)
• Process Reports with thermal printer Reports are generated by the software for each and every cycle in three formats, viz. (i) Single page Summary report and (ii) Detailed Report
• Testing Pressure / Vacuum testing as per specified standards. (1.5 times the working pressure)
• Operation All functions are electro-pneumatically operated. Door closing is manual
• Loading Trolley Fabricated with SS 304
• Battery Backup UPS system will be provided for battery backup. If power failure it will usable for 20 minutes for continuous power supply. 
• Air Filter 0.2-micron air filter also provided with machine for fresh air. 

• Medium Cycle: 35°C to 45°C
• Cool Cycle: 35°C to 40°C
• Hot Cycle: 48°C to 55°C  

• Inner Seal (Chamber) SS 316L Thickness: 5mm 
• Chamber Operating Pressure Negative pressure cycle
• Chamber Testing pressure 1.5 Kg/cm2 
• Single Door SS 316L   Thickness: 10mm 
• Gasket Silicon Gasket (10/12 mm solid section) 
• Steam Generator  SS 316L   Thickness: 3mm 
• Outer cover Factory Finished (Poly-coated) MS  
• Heating SS 316L Heaters on all sides of the Chamber for uniform heating throughout the load.
• Temp Sensor For accurate measuring and controlling of Temp. in the chamber   
• RH% Sensor For measuring and controlling the humidity of the chamber
• Pressure Transmitter For measuring and controlling the pressure-vacuum that the load is subjected to during removal and charging of Gas.
• All fittings on the machine SS 304
• All Valves for Automation Teflon construction Pneumatic valves, operated by Comp. Air supply through Solenoid valves.
• Humidification Special Humidifier for the purpose of humidification of the load and heating of the gas.
• Vacuum  Vacuum created by Ventury system. (Make: Festo)
• Process Reports with thermal printer Reports are generated by the software for each and every cycle in three formats, viz. (i) Single page Summary report and (ii) Detailed Report
• Testing Pressure / Vacuum testing as per specified standards. (1.5 times the working pressure)
• Operation All functions are electro-pneumatically operated. Door closing is manual
• Loading Trolley Fabricated with SS 304
• Battery Backup UPS system will be provided for battery backup. If power failure it will usable for 20 minutes for continuous power supply. 
• Air Filter 0.2-micron air filter also provided with machine for fresh air.

• Maximum: 45°C to 55°C (chamber)
• Medium Cycle: 35°C to 45°C
• Cool Cycle: 35°C to 40°C
• Hot Cycle: 48°C to 55°C   

• Inner Seal(Chamber) SS 316L Thickness: 5mm 
• Chamber Operating Pressure Negative pressure cycle
• Chamber Testing pressure 1.5 Kg/cm2 
• Single Door SS 316L   Thickness: 10mm 
• Gasket Silicon Gasket (10/12 mm solid section) 
• Steam Generator  SS 316L   Thickness: 3mm 
• Outer cover Factory Finished (Poly-coated) MS  
• Heating SS 316L Heaters on all sides of the Chamber for uniform heating throughout the load.
• Temp Sensor For accurate measuring and controlling of Temp. in the chamber 
• RH% Sensor For measuring and controlling the humidity of the chamber
• Pressure Transmitter For measuring and controlling the pressure-vacuum that the load is subjected to during removal and charging of Gas.
• All fittings on the machine SS 304
• All Valves for Automation Teflon construction Pneumatic valves, operated by Comp. Air supply through Solenoid valves.
• Humidification Special Humidifier for the purpose of humidification of the load and heating of the gas.
• Vacuum  Vacuum created by Ventury system. (Make: Festo)
• Automation Hardware PLC
• Make: Kinco
• Process Reports with thermal printer Reports are generated by the software for each and every cycle in three formats, viz. (i) Single page Summary report and (ii) Detailed Report
• Testing Pressure / Vacuum testing as per specified standards. (1.5 times the working pressure)
• Operation All functions are electro-pneumatically operated. Door closing is manual
• Loading Trolley Fabricated with SS 304
• Battery Backup UPS system will be provided for battery backup. If power failure it will usable for 20 minutes for continuous power supply. 
• Air Filter 0.2 micron air filter also provided with machine for fresh air. 

• Medium Cycle: 35°C to 45°C
• Cool Cycle: 35°C to 40°C
• Hot Cycle: 48°C to 55°C