Map Industries

• 600cft -  17cbm
• Material SS 304L with full Argon welding
• Thickness 8mm
• Internal Mirror Finished
• Design Temperature 35 to 55°C
• Type C-type internal connected
• Material SS 304
• Thickness 8mm
• Internal Finished
• HYDROTEST 4 KG/ CM 2
• Material SS304L 
• Thickness 16mm
• Shooting Rod SS

• Material SS 304L with full Argon welding
• Thickness 8mm
• Internal Mirror Finished
• Type C-type internal connected
• Material  MS
• Thickness 8mm
• Internal Finished
• HYDROTEST 4 KG/ CM 2
• Material SS304L
• Thickness 16mm
• Base Plate 6mm

• Material SS 304L with full Argon welding
• Thickness 8mm
• Internal Mirror Finished
• Design Temperature 35 to 55°C
• Vacuum -0.50 bar
• Operating Pressure Negative
• Type C-type internal connected
• Internal Finished
• HYDROTEST 4 KG/ CM 2
• Thickness 16mm
• Base Plate 6mm

• Manufactured as per GMP norms.
• Sterility assurance through automatic temperature control (± 3°C).
• Accurate control of temperature, moisture vacuum, valves and all critical parameters.
• PLC based automation with 6 pre-programmed cycles & additional user defined cycles.
• Automatic aeration cycle at the end of process for ETO exhaust.
• Operates on universally available 100% ETO cartridge.
• Live display of phase status, current values, set values, temperature, pressure & humidity.
• Current & previous reports can be printed through external printer/ internal printer.

• ETO cartridge punctured only in negative pressure & humidity conditions.
• Chamber fabricated with heavy duty SS 304/ SS 316.
• Glass wool insulation.
• Password protection to avoid unauthorized access.

Dear Sir,

MAP Industries is an ISO 13485:2016, ISO 9001:2015, WHO-GMP and CE Certified Company.

We are sending you an offer for ETO sterilizer. The techno/ commercial specifications are mentioned in detail.

The Automation software we provide will be loaded in any existing PC that the client has within a distance of 15-20 feet of the machine. This software is excluding in the price and there is extra cost for the same.

In addition to being able to run the machine from the display on the in-built panel on the front-face of the machine, the operator will be able to change process-parameters, view the whole process, and see records on the computer at any point of time.

Records of every batch of goods/equipment that are sterilized will be stored in the memory of the computer. These records shall be in both graph as well as report formats.

Another important feature of our machines is that they run on 100% ETO cartridges, which is completely safe operationally and saves the hassle of storing a Hazardous gas in large quantities, which no hospital is equipped.

In case there is anything that you need to clarify about the above and the offer please feel free to call/ mail me.

Dear Sir/ Madam,

MAP Industries is an ISO 13485:2016, ISO 9001:2015, WHO-GMP and CE Certified Company.

We are sending herewith a proposal for a CSSD requirement Attached herewith is a detailed techno commercial quotation as per our normal supply. Please go through the same and call/mail us for any clarifications or explanations that you may need.

Dear Sir,

MAP Industries is an ISO 13485:2016, ISO 9001:2015, WHO-GMP and CE Certified Company.

We are sending you an offer for ETO sterilizer. The techno/ commercial specifications are mentioned in detail.

The Automation software we provide will be loaded in any existing PC that the client has within a distance of 15-20 feet of the machine. This software is excluding in the price and there is extra cost for the same.

In addition to being able to run the machine from the display on the in-built panel on the front-face of the machine, the operator will be able to change process-parameters, view the whole process, and see records on the computer at any point of time.

Records of every batch of goods/equipment that are sterilized will be stored in the memory of the computer. These records shall be in both graph as well as report formats.

Another important feature of our machines is that they run on 100% ETO cartridges, which is completely safe operationally and saves the hassle of storing a Hazardous gas in large quantities, which no hospital is equipped.

In case there is anything that you need to clarify about the above and the offer please feel free to call/ mail me.

• Material SS 304L with full Argon welding
• Thickness 8mm
• Internal Mirror Finished
• Type C-type internal connected
• Material  MS
• Thickness 8mm
• Internal Finished
• HYDROTEST 4 KG/ CM 2
• Material SS304L
• Thickness 16mm
• Base Plate 6mm

• Material SS 304L with full Argon welding
• Thickness 8mm
• Internal Mirror Finished
• Type C-type internal connected
• Material  MS
• Thickness 8mm
• Internal Finished
• HYDROTEST 4 KG/ CM 2
• Thickness 16mm
• Base Plate 6mm

We are sending you an offer for ETO sterilizer. The techno/ commercial specifications are mentioned in detail.

The Automation software we provide will be loaded in any existing PC that the client has within a distance of 15-20 feet of the machine. This software is excluding in the price and there is extra cost for the same.

In addition to being able to run the machine from the display on the in-built panel on the front-face of the machine, the operator will be able to change process-parameters, view the whole process, and see records on the computer at any point of time.

Records of every batch of goods/equipment that are sterilized will be stored in the memory of the computer. These records shall be in both graph as well as report formats.

Another important feature of our machines is that they run on 100% ETO cartridges, which is completely safe operationally and saves the hassle of storing a Hazardous gas in large quantities, which no hospital is equipped.

In case there is anything that you need to clarify about the above and the offer please feel free to call/ mail me.

Dear Sir,

MAP Industries is an ISO 13485:2016, ISO 9001:2015, WHO-GMP and CE Certified Company.

We are sending you an offer for ETO sterilizer. The techno/ commercial specifications are mentioned in detail.

The Automation software we provide will be loaded in any existing PC that the client has within a distance of 15-20 feet of the machine. This software is excluding in the price and there is extra cost for the same.

In addition to being able to run the machine from the display on the in-built panel on the front-face of the machine, the operator will be able to change process-parameters, view the whole process, and see records on the computer at any point of time.

Records of every batch of goods/equipment that are sterilized will be stored in the memory of the computer. These records shall be in both graph as well as report formats.

Another important feature of our machines is that they run on 100% ETO cartridges, which is completely safe operationally and saves the hassle of storing a Hazardous gas in large quantities, which no hospital is equipped.

In case there is anything that you need to clarify about the above and the offer please feel free to call/ mail me.

Dear Sir/ Madam,

MAP Industries is an ISO 13485:2016, ISO 9001:2015, WHO-GMP and CE Certified Company.

We are sending herewith a proposal for a CSSD requirement Attached herewith is a detailed techno commercial quotation as per our normal supply. Please go through the same and call/mail us for any clarifications or explanations that you may need.

Dear Sir/ Madam,

MAP Industries is an ISO 13485:2016, ISO 9001:2015, WHO-GMP and CE Certified Company.

We are sending herewith a proposal for a CSSD requirement Attached herewith is a detailed techno commercial quotation as per our normal supply. Please go through the same and call/mail us for any clarifications or explanations that you may need.

We are sending you an offer for ETO sterilizer. The techno/ commercial specifications are mentioned in detail.

The Automation software we provide will be loaded in any existing PC that the client has within a distance of 15-20 feet of the machine. This software is excluding in the price and there is extra cost for the same.

In addition to being able to run the machine from the display on the in-built panel on the front-face of the machine, the operator will be able to change process-parameters, view the whole process, and see records on the computer at any point of time.

Records of every batch of goods/equipment that are sterilized will be stored in the memory of the computer. These records shall be in both graph as well as report formats.

Another important feature of our machines is that they run on 100% ETO cartridges, which is completely safe operationally and saves the hassle of storing a Hazardous gas in large quantities, which no hospital is equipped.

In case there is anything that you need to clarify about the above and the offer please feel free to call/ mail me.

Dear Sir/ Madam,

MAP Industries is an ISO 13485:2016, ISO 9001:2015, WHO-GMP and CE Certified Company.

We are sending herewith a proposal for a CSSD requirement Attached herewith is a detailed techno commercial quotation as per our normal supply. Please go through the same and call/mail us for any clarifications or explanations that you may need.

• Inner Seal (Chamber) SS 316L   Thickness: 5mm 
• Chamber Operating Pressure Negative pressure cycle
• Chamber Testing pressure 1.5 Kg/cm2 
• Single Door SS 316L   Thickness: 10mm 
• Gasket Silicon Gasket (10/12 mm solid section) 
• Steam Generator  SS 316L   Thickness: 3mm 
• Outer cover Factory Finished (Poly-coated) MS  
• Heating SS 316L Heaters on all sides of the Chamber for uniform heating throughout the load.
• Temp Sensor For accurate measuring and controlling of Temp. in the chamber       
• RH% Sensor For measuring and controlling the humidity of the chamber
• Pressure Transmitter For measuring and controlling the pressure-vacuum that the load is subjected to during removal and charging of Gas.
• All fittings on the machine SS 304
• All Valves for Automation Teflon construction Pneumatic valves, operated by Comp. Air supply through Solenoid valves.
• Humidification Special Humidifier for the purpose of humidification of the load and heating of the gas.
• Vacuum  Vacuum created by Ventury system. (Make: Festo)
• Automation Hardware PLC Make: Kinco
• Process Reports with thermal printer Reports are generated by the software for each and every cycle in three formats, viz. (i) Single page Summary report and (ii) Detailed Report
• Testing Pressure / Vacuum testing as per specified standards. (1.5 times the working pressure)
• Operation All functions are electro-pneumatically operated. Door closing is manual
• Loading Trolley Fabricated with SS 304
• Battery Backup UPS system will be provided for battery backup. If power failure it will usable for 20 minutes for continuous power supply. 
• Air Filter 0.2-micron air filter also provided with machine for fresh air. 

• Maximum: 45°C to 55°C (chamber)
• Medium Cycle: 35°C to 45°C
• Cool Cycle: 35°C to 40°C
• Hot Cycle: 48°C to 55°C

• Chamber Size 900mm (W) X 900mm (H) X 1820mm (D) – (3’x 3’x 6’) - 1500 Ltr -
• Material SS 304L with full Argon welding
• Thickness 8mm
• Internal Mirror Finished
• Type C-type internal connected
• Material  MS
• Thickness 8mm
• Internal Finished
• HYDROTEST 4 KG/ CM 2
• Material SS304L
• Thickness 16mm
• Base Plate 6mm

• Inner Seal (Chamber) SS 316L   Thickness: 5mm 
• Chamber Operating Pressure Negative pressure cycle
• Chamber Testing pressure 1.5 Kg/cm2 
• Single Door SS 316L   Thickness: 10mm 
• Gasket Silicon Gasket (10/12 mm solid section) 
• Steam Generator  SS 316L   Thickness: 3mm 
• Outer cover Factory Finished (Poly-coated) MS  
• Heating SS 316L Heaters on all sides of the Chamber for uniform heating throughout the load.
• Temp Sensor For accurate measuring and controlling of Temp. in the chamber     
• RH% Sensor For measuring and controlling the humidity of the chamber
• Pressure Transmitter For measuring and controlling the pressure-vacuum that the load is subjected to during removal and charging of Gas.
• All fittings on the machine SS 304
• All Valves for Automation Teflon construction Pneumatic valves, operated by Comp. Air supply through Solenoid valves.
• Humidification Special Humidifier for the purpose of humidification of the load and heating of the gas.
• Vacuum  Vacuum created by Ventury system. (Make: Festo)
• Automation Hardware PLC Make: Kinco 
• Process Reports with thermal printer Reports are generated by the software for each and every cycle in three formats, viz. (i) Single page Summary report and (ii) Detailed Report
• Testing Pressure / Vacuum testing as per specified standards. (1.5 times the working pressure)
• Operation All functions are electro-pneumatically operated. Door closing is manual
• Loading Trolley Fabricated with SS 304
• Battery Backup UPS system will be provided for battery backup. If power failure it will usable for 20 minutes for continuous power supply. 
• Air Filter 0.2-micron air filter also provided with machine for fresh air. 

• Maximum: 45°C to 55°C (chamber)
• Medium Cycle: 35°C to 45°C
• Cool Cycle: 35°C to 40°C
• Hot Cycle: 48°C to 55°C

• Inner Seal (Chamber) SS 316L   Thickness: 5mm 
• Chamber Operating Pressure Negative pressure cycle
• Chamber Testing pressure 1.5 Kg/cm2 
• Single Door SS 316L   Thickness: 10mm 
• Gasket Silicon Gasket (10/12 mm solid section) 
• Steam Generator  SS 316L   Thickness: 3mm 
• Outer cover Factory Finished (Poly-coated) MS  
• Heating SS 316L Heaters on all sides of the Chamber for uniform heating throughout the load.
• Temp Sensor For accurate measuring and controlling of Temp. in the chamber
• RH% Sensor For measuring and controlling the humidity of the chamber
• Pressure Transmitter For measuring and controlling the pressure-vacuum that the load is subjected to during removal and charging of Gas.
• All fittings on the machine SS 304
• All Valves for Automation Teflon construction Pneumatic valves, operated by Comp. Air supply through Solenoid valves.
• Humidification Special Humidifier for the purpose of humidification of the load and heating of the gas.
• Vacuum  Vacuum created by Ventury system. (Make: Festo)
• Automation Hardware PLC Make: Kinco
• Process Reports with thermal printer Reports are generated by the software for each and every cycle in three formats, viz. (i) Single page Summary report and (ii) Detailed Report
• Testing Pressure / Vacuum testing as per specified standards. (1.5 times the working pressure)
• Operation All functions are electro-pneumatically operated. Door closing is manual
• Loading Trolley Fabricated with SS 304
• Battery Backup UPS system will be provided for battery backup. If power failure it will usable for 20 minutes for continuous power supply. 
• Air Filter 0.2 micron air filter also provided with machine for fresh air. 

• Maximum: 45°C to 55°C (chamber)
• Medium Cycle: 35°C to 45°C
• Cool Cycle: 35°C to 40°C
• Hot Cycle: 48°C to 55°C  

• Inner Seal (Chamber) SS 316L   Thickness: 5mm 
• Chamber Operating Pressure Negative pressure cycle
• Chamber Testing pressure 1.5 Kg/cm2 
• Single Door SS 316L   Thickness: 10mm 
• Gasket Silicon Gasket (10/12 mm solid section) 
• Steam Generator  SS 316L   Thickness: 3mm 
• Outer cover Factory Finished (Poly-coated) MS  
• Heating SS 316L Heaters on all sides of the Chamber for uniform heating throughout the load.
• Temp Sensor For accurate measuring and controlling of Temp. in the chamber  
• RH% Sensor For measuring and controlling the humidity of the chamber
• Pressure Transmitter For measuring and controlling the pressure-vacuum that the load is subjected to during removal and charging of Gas.
• All fittings on the machine SS 304
• All Valves for Automation Teflon construction Pneumatic valves, operated by Comp. Air supply through Solenoid valves.
• Humidification Special Humidifier for the purpose of humidification of the load and heating of the gas.
• Vacuum  Vacuum created by Ventury system. (Make: Festo)
• Automation Hardware PLC
• Make: Kinco 
• Make: Kinco (7 Inch – Multicolor)
• Process Reports with thermal printer Reports are generated by the software for each and every cycle in three formats, viz. (i) Single page Summary report and (ii) Detailed Report
• Testing Pressure / Vacuum testing as per specified standards. (1.5 times the working pressure)
• Operation All functions are electro-pneumatically operated. Door closing is manual
• Loading Trolley Fabricated with SS 304
• Battery Backup UPS system will be provided for battery backup. If power failure it will usable for 20 minutes for continuous power supply. 
• Air Filter 0.2-micron air filter also provided with machine for fresh air.

• Medium Cycle: 35°C to 45°C
• Cool Cycle: 35°C to 40°C
• Hot Cycle: 48°C to 55°C     

Dear Sir,

MAP Industries is an ISO 13485:2016, ISO 9001:2015, WHO-GMP and CE Certified Company.

We are sending you an offer for ETO sterilizer. The techno/ commercial specifications are mentioned in detail.

The Automation software we provide will be loaded in any existing PC that the client has within a distance of 15-20 feet of the machine. This software is excluding in the price and there is extra cost for the same.

In addition to being able to run the machine from the display on the in-built panel on the front-face of the machine, the operator will be able to change process-parameters, view the whole process, and see records on the computer at any point of time.

Records of every batch of goods/equipment that are sterilized will be stored in the memory of the computer. These records shall be in both graph as well as report formats.

Another important feature of our machines is that they run on 100% ETO cartridges, which is completely safe operationally and saves the hassle of storing a Hazardous gas in large quantities, which no hospital is equipped.

In case there is anything that you need to clarify about the above and the offer please feel free to call/ mail me.

Dear Sir/ Madam,

MAP Industries is an ISO 13485:2016, ISO 9001:2015, WHO-GMP and CE Certified Company.

We are sending herewith a proposal for a CSSD requirement Attached herewith is a detailed techno commercial quotation as per our normal supply. Please go through the same and call/mail us for any clarifications or explanations that you may need.